Drager PEX 3000 Fixed Gas Transmitter

Drager PEX 3000 Fixed Gas Transmitter

-----

The Drager PEX 3000 Fixed Gas Transmitter is designed for the continuous detection of flammable gases and vapours in industrial environments. It uses a catalytic bead sensor to measure gas concentrations below the Lower Explosive Limit (LEL), helping facilities monitor potential explosion hazards. This model comes with a measuring range of 0–100% LEL and a large transmitter housing.

The Drager PEX 3000 converts the detected gas concentration into a standard 4–20 mA output signal, allowing connection to compatible central controllers and gas monitoring systems. Its catalytic sensor provides a fast response, while the stable measurement signal supports reliable long-term gas monitoring. The transmitter is suitable for industrial installations where continuous monitoring of flammable gases and vapours is required.

The XTR 0001 features a two-digit, seven-segment display and two operating keys accessible inside the opened enclosure. These controls allow calibration and maintenance to be performed directly at the transmitter without requiring an additional handheld control unit. Its robust glass-fibre-reinforced polyester housing and IP66 protection make it suitable for demanding industrial environments.

For more details about the Drager PEX 3000 Fixed Gas Transmitter, please click here to visit the manufacturer's page. If you have any questions, please contact us.

Features of Drager PEX 3000 Fixed Gas Transmitter

-----

• Continuous Flammable Gas Detection: Designed for continuous monitoring of flammable gases and vapours in industrial environments.

• Catalytic Bead Sensor: Uses a catalytic bead measuring principle to detect combustible gases.

• 0–100% LEL Measuring Range: Measures gas concentrations across a range of 0–100% of the Lower Explosive Limit.

• 4–20 mA Output: Provides a standard analogue output signal for connection to compatible central controllers.

• Fast Response Time: Offers a response time of approximately 3–5 seconds (t50) and 8–10 seconds (t90) for methane at 25°C.

• One-Person Calibration: Allows calibration and maintenance directly at the transmitter using two operating keys and a two-digit display.

• Simple Installation: Features spring-loaded terminals for convenient connection of the measuring cable and sensor.

• Long-Term Measurement Stability: Uses a double-detector compensation method to support stable sensor performance.

• Explosion Protection: Designed and approved for use in suitable hazardous gas and dust areas, subject to the applicable installation conditions.

• IP66 Protection: Provides protection against dust and powerful water jets.

• Robust Housing: Features a glass-fibre-reinforced polyester (GFRP) enclosure.

• Wide Operating Temperature: Supports operation in temperatures from -40°C to +65°C, depending on the applicable temperature class.

• SIL 1 Capability: The 100% LEL variants have SIL 1 functional safety capability.

Specifications of Drager PEX 3000 Fixed Gas Transmitter

-----

• Brand: Drager

• Product Series: PEX 3000

• Model: XTR 0001

• Part Number: 8318360

• Product Type: Fixed Gas Transmitter

• Measuring Principle: Catalytic Bead Sensor

• Measuring Range: 0–100% LEL

• Sensor: DragerSensor PR M DQ

• Output Signal: 4–20 mA

• Response Time (Methane at 25°C): t50: 3–5 seconds; t90: 8–10 seconds

• Power Supply: 12–30 V DC

• Operating Temperature: -40°C to +65°C, depending on temperature class

• Ambient Pressure: 700–1,300 hPa

• Relative Humidity: 5–95% RH

• Housing Material: Glass-fibre-reinforced polyester (GFRP)

• Ingress Protection: IP66

• Dimensions (W × H × D): Approximately 135 × 110 × 55 mm

• Weight: Approximately 600 g

• Display: Two-digit, seven-segment display accessible inside the opened enclosure

• Calibration: Menu-controlled calibration using two operating keys

• Explosion Protection: ATEX-approved; applicable marking depends on temperature class and installation conditions

• Functional Safety: SIL 1 capability for 100% LEL variants

Compatibility note: The XTR 0001 includes a 100% LEL sensor. Confirm the target gas, applicable sensor requirements, controller compatibility and hazardous-area installation conditions before ordering.

Download Drager PEX 3000 Datasheet

-----

• Drager PEX 3000 Datasheet

Why Buy Drager PEX 3000 Fixed Gas Transmitter from Gulf AED?

-----

• Factory Calibration Certificate : Factory Calibration Certificate included with Drager PEX 3000 Fixed Gas Transmitter.

• Best online prices : Best online prices for Drager PEX 3000 Fixed Gas Transmitter.

• Bulk Discount : Gulf AED offers exclusive bulk discounts on Gas Detectors for industrial facilities, oil and gas operations, manufacturing plants, and other high-risk environments. Maximize your savings by purchasing in larger quantities.

• Fast Shipping : We prioritize fast and accurate delivery of Gas Detectors, ensuring your safety needs are met without delay.

• In Stock : Get the Gas Detectors you need without delay our inventory is always ready for fast shipping.

• Local presence : Local presence in Deira, trading hub of Dubai UAE.

Gulf AED is Supplier of Drager PEX 3000 Fixed Gas Transmitter in Abu Dhabi, Dubai (UAE), Saudi Arabia (KSA), Bahrain, Iraq, Kuwait, Oman & Qatar.

For over 15 years, Gulf AED has been a leading provider of Personal protective equipment (PPE), AED defibrillators, AED accessories and other medical equipment in the GCC region. We proudly serve marine ship chandlers, oil refineries, oil rigs, government offices, private companies, residential communities, shopping malls, educational institutions such as schools and universities, as well as hospitals and clinics.

Please see our store policy for more details on shipping and returns.