Honeywell NOTIFIER FCM-1 Supervised Control Module

Honeywell NOTIFIER FCM-1 Supervised Control Module

-----

The Honeywell NOTIFIER FCM-1 Supervised Control Module is an intelligent addressable control module designed for compatible NOTIFIER fire alarm systems. It provides a supervised notification appliance circuit for controlling devices that require an external power supply, such as horns, strobes, speakers, bells and solenoids.

The FCM-1 connects to a compatible fire alarm control panel through a two-wire Signaling Line Circuit (SLC). It can be activated manually or through control-panel programming to operate notification appliances in a selected zone or coverage area. The module supervises the connected circuit and reports its condition to the panel, including normal, open and short-circuit status.

The Honeywell NOTIFIER FCM-1 supports Class A (Style Z) and Class B (Style Y) circuit configurations. It features rotary address switches, SEMS screw terminals, a panel-controlled LED indicator and compatibility with FlashScan and CLIP communication protocols. Its internal circuitry is powered directly from the SLC loop, while connected notification appliances require an appropriate external power supply or compatible audio source, depending on the application.

For more details about the Honeywell NOTIFIER FCM-1 Supervised Control Module, please click here to visit the manufacturer's page. If you have any questions, please contact us.

Features of Honeywell NOTIFIER FCM-1 Supervised Control Module

-----

• Intelligent Addressable Control: Allows compatible NOTIFIER fire alarm control panels to activate the module manually or through panel programming.

• Supervised Notification Circuit: Monitors the connected notification appliance circuit and reports normal, open or short-circuit conditions to the control panel.

• Class A and Class B Compatibility: Supports Class A (Style Z) and Class B (Style Y) notification appliance circuit configurations.

• Two-Wire SLC Communication: Communicates with the compatible fire alarm control panel through a two-wire Signaling Line Circuit.

• Direct SLC Power: The module's internal circuitry and relay are powered directly from the SLC loop.

• External Power Supply Control: Switches an external power source to compatible notification appliances when commanded by the control panel.

• FlashScan Compatibility: Supports addresses from 01–159 on compatible FlashScan loops.

• CLIP Compatibility: Supports addresses from 01–99 on compatible CLIP loops.

• Notification Appliance Support: Designed for compatible horns, strobes, bells, speakers, solenoids and other suitable notification loads.

• Panel-Controlled LED: Provides visual status indication for communication and module activation.

• Rotary Address Switches: Allows the module's individual address to be selected using built-in rotary switches.

• SEMS Screw Terminals: Features screw terminals with clamping plates to facilitate field wiring.

• High Noise Immunity: Designed to support reliable communication in electrically noisy environments.

• Low Standby Current: Supports low-current operation during normal communication.

• Wide LED Viewing Angle: Provides a visible status indication from different viewing positions.

• Standard Electrical Box Mounting: Mounts directly to a standard 4-inch square electrical box with a minimum depth of 2⅛ inches.

• Additional Mounting Options: Can also be installed in a compatible SMB500 Series surface-mounted electrical box or DNR(W) duct housing, where suitable.

Specifications of Honeywell NOTIFIER FCM-1 Supervised Control Module

-----

• Brand: Honeywell NOTIFIER

• Model: FCM-1

• Product Type: Intelligent Addressable Supervised Control Module

• Primary Function: Control and supervision of notification appliance circuits

• Normal Operating Voltage: 15–32 VDC

• Maximum Current Draw: 6.5 mA with LED on

• Average Operating Current: 350 µA in direct-poll mode; 375 µA in group-poll mode with LED flashing

• Maximum Current Under Specified Fault Condition: 485 µA with LED flashing and notification appliance circuit shorted

• Communication Interface: Two-wire Signaling Line Circuit (SLC)

• FlashScan Address Range: 01–159

• CLIP Address Range: 01–99

• Circuit Configuration: Class A (Style Z) or Class B (Style Y)

• Maximum Notification Appliance Circuit Line Loss: 4 VDC

• Maximum External NAC Supply: Regulated 24 VDC

• Maximum External Speaker Supply: 70.7 VRMS, 50 W, as specified in the installation documentation

• Maximum NAC Current Rating: 2 A for Class A wiring; 3 A for Class B wiring

• External Supply Current Drain: Up to 1.7 mA with a 24 VDC supply or 2.2 mA with an 80 VRMS supply, as specified in the installation documentation

• Operating Temperature: 0°C to 49°C (32°F to 120°F)

• Relative Humidity: 10%–93%, non-condensing

• Dimensions: 4.675 × 4.275 × 1.4 inches (height × width × depth)

• Metric Dimensions: Approximately 119 × 108 × 36 mm

• Mounting Requirement: Standard 4-inch square electrical box with a minimum depth of 2⅛ inches

• Optional Mounting Accessory: SMB500 Series surface-mounted electrical box

• Additional Mounting Option: Compatible DNR(W) duct housing

• Compatible Communication Protocols: FlashScan and CLIP, with a compatible NOTIFIER control panel

• Approvals Listed by Manufacturer: UL S635, FM Approved, CSFM 7300-0028:0219, MEA 14-00-E, FDNY COA #6067 and #6065; ULC S3705 for the applicable FCM-1A version

Compatibility note: Confirm the control panel model, circuit configuration, external power supply and applicable module version before ordering or installation.

Download Honeywell NOTIFIER FCM-1 Datasheet & Manual

-----

• Honeywell NOTIFIER FCM-1 Series Datasheet (DOC-02-040)

• Honeywell NOTIFIER FCM-1 Supervised Control Module Installation and Maintenance Instructions (I56-3500-010)

Why Buy Honeywell NOTIFIER FCM-1 Supervised Control Module from Gulf AED?

-----

• Technical Support: Gulf AED provides assistance with Honeywell NOTIFIER FCM-1 specifications, compatible fire alarm panels and installation requirements.

• Competitive Prices: Get competitive prices on the Honeywell NOTIFIER FCM-1 Supervised Control Module in Dubai (UAE).

• Bulk Discount: Gulf AED supports bulk purchasing enquiries from fire alarm contractors, system integrators, businesses and large institutions.

• Fast Shipping: We offer delivery options for fire alarm system components across the UAE. Contact our team to confirm shipping availability and delivery timelines.

• Product Availability: Contact Gulf AED to check current stock status and lead time for the Honeywell NOTIFIER FCM-1 Supervised Control Module.

• Local Presence: Gulf AED serves customers in Dubai, UAE, providing support for fire alarm and life safety equipment enquiries.

Frequently Asked Questions (FAQs) – Honeywell NOTIFIER FCM-1 Supervised Control Module

-----

1. What is the Honeywell NOTIFIER FCM-1 Supervised Control Module?

The FCM-1 is an intelligent addressable control module designed for compatible NOTIFIER fire alarm systems. It controls and supervises notification appliance circuits connected to devices that require an external power supply.

2. What devices can the FCM-1 control?

The FCM-1 is designed for compatible notification appliances and loads, including horns, strobes, bells, speakers and solenoids, depending on the circuit configuration and application requirements.

3. Does the FCM-1 support Class A and Class B wiring?

Yes. The FCM-1 supports Class A (Style Z) and Class B (Style Y) notification appliance circuit configurations. The correct configuration must be selected according to the system design and manufacturer's instructions.

4. Which addressing protocols does the FCM-1 support?

The FCM-1 supports FlashScan and CLIP communication protocols on compatible NOTIFIER fire alarm systems. Its address range is 01–159 on FlashScan loops and 01–99 on CLIP loops.

5. Does the FCM-1 require a separate power supply?

The module's internal circuitry and relay are powered directly from the SLC loop. Connected notification appliances require an appropriate external power supply or compatible audio source, depending on the application.

6. How can I request a quotation for the Honeywell NOTIFIER FCM-1?

To request a quotation, contact Gulf AED through the following channels:

• Website: Gulf AED

• Email: inquiry@gulfaed.com

• Contact page: Contact Gulf AED

Please provide the required quantity, delivery location and existing fire alarm control panel model so our team can assist with your enquiry.

Gulf AED is Supplier of Honeywell NOTIFIER FCM-1 Supervised Control Module in Abu Dhabi, Dubai (UAE), Saudi Arabia (KSA), Bahrain, Iraq, Kuwait, Oman & Qatar.

For over 15 years, Gulf AED has been a leading provider of AED defibrillators, AED accessories and other medical equipment in the GCC region. We proudly serve marine ship chandlers, oil refineries, oil rigs, government offices, private companies, residential communities, shopping malls, educational institutions such as schools and universities, as well as hospitals and clinics.

Please see our store policy for more details on shipping and returns.