Honeywell NOTIFIER FMM-1 Intelligent Monitor Module

Honeywell NOTIFIER FMM-1 Intelligent Monitor Module

-----

The Honeywell NOTIFIER FMM-1 Intelligent Monitor Module is an intelligent addressable monitor module designed for compatible NOTIFIER fire alarm systems. It monitors circuits connected to dry-contact input devices and communicates their status to the fire alarm control panel. Typical applications include conventional heat detectors, manual call points, sprinkler valve monitoring and other compatible fire alarm and supervisory devices.

The FMM-1 supports two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) configurations. It can supervise Class A (Style D) or Class B (Style B) circuits of compatible dry-contact devices. The module also supports normally open and normally closed security devices where applicable. A built-in rotary address switch allows individual module addressing, while the panel-controlled LED provides visual status indication.

The Honeywell NOTIFIER FMM-1 is powered directly from the two-wire Signaling Line Circuit (SLC), so no separate power supply is required for the module itself. It features SEMS screw terminals with clamping plates, high electromagnetic and radio-frequency interference immunity, and compatibility with FlashScan and CLIP protocols on supported systems.

For more details about the Honeywell NOTIFIER FMM-1 Intelligent Monitor Module, please click here to visit the manufacturer's page. If you have any questions, please contact us.

Features of Honeywell NOTIFIER FMM-1 Intelligent Monitor Module

-----

• Intelligent Addressable Monitoring: Monitors connected input devices and communicates their status to a compatible NOTIFIER fire alarm control panel.

• Dry-Contact Device Monitoring: Supports compatible normally open contact fire alarm and supervisory devices.

• Class A and Class B Compatibility: Supports Class A (Style D) and Class B (Style B) initiating device circuit configurations.

• Two-Wire or Four-Wire IDC: Provides a two-wire or four-wire fault-tolerant initiating device circuit, as supported by the installation configuration.

• Wide Application Support: Suitable for compatible conventional heat detectors, manual call points, sprinkler valve monitoring and other dry-contact input devices.

• Security Device Monitoring: Supports compatible normally open or normally closed security devices in applicable configurations.

• Two-Wire SLC Communication: Communicates with the compatible control panel through a two-wire Signaling Line Circuit.

• Direct SLC Power: Powered directly from the SLC loop without requiring a separate power supply for the module itself.

• FlashScan Compatibility: Supports addresses from 01–159 on compatible FlashScan systems.

• CLIP Compatibility: Supports addresses from 01–99 on compatible CLIP systems.

• Rotary Address Switches: Allows the module's individual address to be selected using built-in rotary switches.

• Panel-Controlled LED: Provides visual indication of module status. The LED can flash green during normal communication and latch steady red to indicate an alarm, subject to system programming.

• Automatic Device Identification: Built-in type identification allows the control panel to identify the device as a monitor module.

• High Noise Immunity: Designed to resist electromagnetic and radio-frequency interference.

• SEMS Screw Terminals: Features screw terminals with clamping plates to facilitate wiring connections.

• End-of-Line Resistor: Uses a 47 kΩ end-of-line resistor for applicable Class B circuit configurations; no resistor is required for supervision of the Class A configuration described in the manufacturer's documentation.

• Standard Electrical Box Mounting: Mounts directly to a standard 4-inch square electrical box with a minimum depth of 2⅛ inches.

• Optional Surface Mounting: Compatible with the SMB500 Series surface-mounted electrical box.

Specifications of Honeywell NOTIFIER FMM-1 Intelligent Monitor Module

-----

• Brand: Honeywell NOTIFIER

• Model: FMM-1

• Product Type: Intelligent Addressable Monitor Module

• Primary Function: Monitoring and supervision of compatible input devices

• Normal Operating Voltage: 15–32 VDC

• Maximum Current Draw: 5.0 mA with LED on

• Average Operating Current: 375 µA in group-poll mode; 350 µA in direct-poll mode

• Maximum Communicating Current: 600 µA with the initiating device circuit shorted

• Communication Interface: Two-wire Signaling Line Circuit (SLC)

• FlashScan Address Range: 01–159

• CLIP Address Range: 01–99

• IDC Configuration: Two-wire or four-wire fault-tolerant circuit

• Supported Circuit Styles: Class A (Style D) and Class B (Style B)

• End-of-Line Resistance: 47 kΩ

• Maximum IDC Wiring Resistance: 1,500 Ω

• Maximum IDC Voltage: 11 V

• Maximum IDC Current: 450 µA

• Operating Temperature: 0°C to 49°C (32°F to 120°F)

• Relative Humidity: 10%–93%, non-condensing

• Dimensions: 4.5 × 4 × 1.25 inches (height × width × depth)

• Metric Dimensions: Approximately 114.3 × 101.6 × 31.75 mm

• Mounting Requirement: Standard 4-inch square electrical box with a minimum depth of 2⅛ inches

• Optional Mounting Accessory: SMB500 Series surface-mounted electrical box

• Wiring Terminals: SEMS screws with clamping plates

• Power Supply: Powered directly from the SLC loop

• Compatible Communication Protocols: FlashScan and CLIP, with a compatible NOTIFIER control panel

• Manufacturer-Listed Certifications: UL Listed, ULC Listed and FM Approved, subject to the specific model and applicable listing

Compatibility note: The FMM-1 must be connected to a compatible NOTIFIER system control panel. Confirm the panel model, initiating device circuit configuration and installation requirements before ordering.

Download Honeywell NOTIFIER FMM-1 Datasheet & Manual

-----

• Honeywell NOTIFIER FMM-1 Series Datasheet (DOC-02-040)

• Honeywell NOTIFIER FMM-1 Intelligent Monitor Module Installation and Maintenance Instructions (I56-3506-001)

Why Buy Honeywell NOTIFIER FMM-1 Intelligent Monitor Module from Gulf AED?

-----

• Technical Support: Gulf AED provides assistance with Honeywell NOTIFIER FMM-1 specifications, compatibility and installation requirements.

• Competitive Prices: Get competitive prices on the Honeywell NOTIFIER FMM-1 Intelligent Monitor Module in Dubai (UAE).

• Bulk Discount: Gulf AED supports bulk purchasing enquiries from fire alarm contractors, system integrators, businesses and large institutions.

• Fast Shipping: We offer delivery options for fire alarm system components across the UAE. Contact our team to confirm shipping availability and delivery timelines.

• Product Availability: Contact Gulf AED to check current stock status and lead time for the Honeywell NOTIFIER FMM-1 Intelligent Monitor Module.

• Local Presence: Gulf AED serves customers in Dubai, UAE, providing support for fire alarm and life safety equipment enquiries.

Frequently Asked Questions (FAQs) – Honeywell NOTIFIER FMM-1 Intelligent Monitor Module

-----

1. What is the Honeywell NOTIFIER FMM-1 Intelligent Monitor Module?

The FMM-1 is an intelligent addressable monitor module designed for compatible NOTIFIER fire alarm systems. It monitors connected dry-contact input devices and reports their status to the fire alarm control panel.

2. What devices can the FMM-1 monitor?

The FMM-1 can monitor compatible conventional heat detectors, manual call points, sprinkler valve contacts and other suitable fire alarm or supervisory devices. It can also support applicable security devices, depending on their contact configuration and system requirements.

3. Does the FMM-1 support Class A and Class B wiring?

Yes. The FMM-1 supports Class A (Style D) and Class B (Style B) initiating device circuits. The correct wiring configuration must follow the manufacturer's instructions and the compatible control panel requirements.

4. Does the FMM-1 require a separate power supply?

No separate power supply is required for the module itself because it is powered directly from the two-wire SLC loop. The connected devices must meet the electrical requirements of the selected circuit configuration.

5. Which addressing protocols does the FMM-1 support?

The FMM-1 supports FlashScan and CLIP protocols on compatible NOTIFIER systems. Its address range is 01–159 on FlashScan systems and 01–99 on CLIP systems.

6. What is the end-of-line resistor value for the FMM-1?

The specified end-of-line resistance is 47 kΩ for applicable Class B circuit configurations. The manufacturer's documentation states that no resistor is required for supervision of the Class A configuration.

7. How can I request a quotation for the Honeywell NOTIFIER FMM-1 Intelligent Monitor Module?

To request a quotation, contact Gulf AED through the following channels:

• Website: Gulf AED

• Email: inquiry@gulfaed.com

• Contact page: Contact Gulf AED

Please provide the required quantity, delivery location and existing fire alarm control panel model so our team can assist with your enquiry.

Gulf AED is Supplier of Honeywell NOTIFIER FMM-1 Intelligent Monitor Module in Abu Dhabi, Dubai (UAE), Saudi Arabia (KSA), Bahrain, Iraq, Kuwait, Oman & Qatar.

For over 15 years, Gulf AED has been a leading provider of AED defibrillators, AED accessories and other medical equipment in the GCC region. We proudly serve marine ship chandlers, oil refineries, oil rigs, government offices, private companies, residential communities, shopping malls, educational institutions such as schools and universities, as well as hospitals and clinics.

Please see our store policy for more details on shipping and returns.